Chengdu brand air disinfection machine (medical air disinfection machine) operation function introduction

Brand air disinfection machine (medical air disinfection machine) operation function introduction Ultraviolet air disinfection machine-multifunctional medical air sterilizer, adopts diversified disinfection and sterilization technology, is very effective in preventing bacteria from developing resistance, and kills microorganisms in the hospital air quickly , High efficiency, no dead ends, can effectively block the spread of the virus in the hospital air. Ultraviolet air disinfection machine-dynamic medical air disinfection machine functions: filter and purify the air, sterilize and disinfect, remove all kinds of peculiar smells in the air, and remove harmful gases in the air. The following will introduce the operation and setting of the ultraviolet air disinfection machine-dynamic medical air disinfection machine. 1. Ultraviolet air disinfection machine-automatic disinfection mode of dynamic medical air sterilizer: 1) Press the automatic operation key to select the automatic operation mode. 2) In the automatic operation mode, press the setting key, the increment key and the decrement key to adjust the automatic switch-on time. The adjustment sequence is: 1ON, 1OFF --- 6ON, 6OFF. 3) After the machine selects the automatic operation mode, it will automatically turn on and off according to the set time. During the startup time, the fan and the sterilization factor work; during the shutdown time (this time period is also called the standby state), the fan and the sterilization factor are turned off. 4) The swing wind can be selected by pressing the swing wind key to swing and stop swinging. 5) After adjusting the power on and off time, you can press it to exit in a cycle, or you can press the power button in the middle to exit or unplug the power directly to exit. 6) After adjusting the switch time, the last time setting value will be automatically saved and saved forever. 2. Ultraviolet air disinfection machine-dynamic medical air disinfection machine manual disinfection mode: 1) Press the temporary run button, select temporary disinfection, disinfect according to the set time, and automatically return to the automatic operation mode when the disinfection time is up. 2) The disinfection time adopts countdown mode, and the countdown time can be set freely. 3) In the temporary operation mode, press the setting key, the increment key and the decrement key to adjust the disinfection time, and the maximum can be set to 24 hours. 4) During temporary disinfection, the fan and sterilization factor work, and the swing wind can be selected to swing and stop swinging by pressing the swing wind button. 5). After adjusting the disinfection time, you can press the cycle to the end to exit, you can also press the power button in the middle to exit or unplug the power directly to exit. 6) After adjusting the switch time, the last time setting value will be automatically saved and saved forever. 3. In the power-on state, you can press the swing button to pause the swing, and press the swing button again to continue the swing. 4. When the ultraviolet air disinfection machine-dynamic medical air disinfection machine is turned on or in standby mode, short press the wind speed key to select the predetermined running wind speed. 5. Long press the wind speed key for 3 seconds. You can query the remaining working time of the fan (filter). In the query state, you can press the up and down keys to adjust the cycle time. When the fan is working, it counts down the fan (filter) time, when it is reduced to 0, it will prompt:! Please clean or replace the filter. Long press the wind speed key again to set. The maximum working time of the fan can be set to 99999 hours. 6. Long press the temporary operation key for 3 seconds to query the remaining working time of the sterilization factor. In the query state, you can press the up and down keys to adjust the cycle time. When the bactericidal factor is working, it counts down the time. When it reaches 0, it prompts:! Please replace the disinfection factor. If the sterilization factor cycle time is set to 0, the prompt function can be shielded and no prompt will appear. If the sterilization factor runs down to 0 and a prompt appears, press the sterilization key again to set it. The maximum cycle working time of the sterilization factor can be set to 99999 hours. 7. Long press to automatically run the key for 3 seconds, and the working time of the fan (filter) and sterilization factor can be restored to the factory default value. 8. Long press the setting button for 3 seconds, the ultraviolet air disinfection machine-dynamic medical air disinfection machine can enter to adjust the current Beijing time state, press the increment and decrement keys to adjust the corresponding time value. 9. Press the power button to select the power on/off state. When it is turned off, the LCD and backlight are turned off. Pressing other keys is invalid. If the sterilizer is not used for a long time, it is recommended to turn off the power switch.
Every day of the year, there is some city or town in the world that is changing over to for custom air cleaners.
Now you can buy cheap at wholesale price at Qingdao Funglan Environmental Protection & Technology Co., Ltd.! Do visit Funglan Air Purifier for great deals!
Qingdao Funglan Environmental Protection & Technology Co., Ltd. can promise that air sterilizer is one of the best products sold in the worldwide market at present.