For the instructions and daily maintenance of the air disinfector, see the following article. How to use the air disinfection machine 1. Keep the air disinfection machine instruction manual and operate as required. 2. Pay attention to the airtightness of the room. Doors and windows should be closed during disinfection to maintain good airtightness in the room. Irrelevant personnel are strictly prohibited from entering, and the number of indoor personnel should be minimized to ensure the disinfection effect. 3. Pay attention to the hygiene of indoor surfaces. This machine is only effective for air and has no disinfection effect on the surface of objects. If there is a lot of dust on the surface of indoor objects, the disinfection machine will produce secondary dust when it is working, causing continuous air pollution by microorganisms, and eventually leading to disinfection failure within the specified time. 4. Choice of disinfection boot time. 1) Preventive disinfection: regular disinfection 2-3 times a day, 60-120min each time. It is generally arranged before work in the morning and after get off work in the afternoon or at night. The general disinfection time is 5 hours. 2) Dynamic disinfection: the purpose is to control and reduce the secondary pollution of ambient air during personnel activities. It is usually carried out during the peak period of personnel activities. 3) Static disinfection can be carried out once a week for 2 hours. 5. Corresponding records should be made at the end of each disinfection, and the cumulative time should not exceed 4000 hours. How long does the air disinfection machine need to be cleaned and maintained once under normal conditions, we bought it at Weiyi, and it is maintained every six months, depending on the use environment. How long does the air disinfection machine need to be cleaned and maintained? Once? I have shared a lot of relevant knowledge about air disinfection machines before, including the precautions for air disinfection machine selection, use environment requirements, air disinfection machine operation, etc. I must have known a lot. During our use, the air disinfection machine will definitely be lost, the pollutants in the intercepted air, etc., when the use time is long, we need to clean and maintain the air sterilizer
, otherwise it will affect The use effect of the air disinfector and the service life of the body. Then many friends will ask, how long does it need to be cleaned after use, and how long does it need to be maintained and repaired? Because the users are basically non-professionals, and they think that the machine can be turned on and can operate to achieve a good disinfection and sterilization effect. But in fact, it is not. When the machine is in use, the air inlet/outlet and the filter device tend to accumulate a lot of air dust, relatively large particles, hair, etc. And these objects are the carriers of bacteria, which will affect the cleanliness of the hospital. Then how do we solve this secondary pollution problem? The answer is simple, that is, regular cleaning. Then many friends will ask, how do we know when to clean and when to maintain? Indeed, depending on the use environment, the frequency of use, the time of natural cleaning and maintenance are also different, because none of them are more detailed standard. Every manufacturer has different opinions, and it is really difficult to figure out. There is an induction timing device inside the machine, which can accumulate the use time, and can sense the cleanliness of the filter, disinfection and purification device, whether it is working, whether it is cleaning, replacement, maintenance, etc. If the main parts of the machine are malfunctioning or not working, there will be a reminder function. And will be uniformly displayed on the LCD screen, clear at a glance, very convenient. After using the Angel brand air disinfection machine for 3 to 6 months, please clean or replace the filter according to the 'filter cleaning'*** prompt on the display of the machine. Neutral detergent water can be used to clean the filter. The water temperature should not exceed 50℃, and it is strictly forbidden to use brush tools to avoid damage to the filter. Note that if the main components of the air sterilizer are not cleaned in time, the effect of sterilization and dust collection will be promoted due to dust accumulation. 6. u200bu200bThe disinfection machine adopts the principle of physical filtration and disinfection of ultraviolet circulating wind, so the space around the disinfection machine should be avoided as much as possible to keep the air flowing smoothly, and the good circulation of the air should be protected as much as possible. Disinfection machine cleaning and maintenance 1. Keep the disinfection machine clean and dry. Wipe the surface with a damp cloth after disinfection every day. When cleaning, cut off the power and pull out the power plug to avoid direct contact with water or flushing. 2. When the sterilizer is working, it is strictly forbidden to allow objects or hands to approach the ventilation inlet and outlet of the sterilizer; during handling and loading, prevent the product from being hit by hard objects or falling to the ground. 3. When the disinfection machine is found to work abnormally (fault display or alarm), immediately turn off the power switch, pull out the power plug, and call the equipment maintenance personnel to check. 4. Check the filter every month, uncover the air inlet panel, remove the filter, and clean it with clean water or water with neutral detergent. It is strictly forbidden to scrub with brush tools. The water temperature should not exceed 40°C to avoid deformation and washing. After clean and dry in a cool and ventilated place, install it in the original way, and replace the filter every year. The cleaning and replacement of the filter should be recorded. 5. The cumulative use time of the sterilizer does not exceed 4000 hours. If the cumulative time is reached, the ultraviolet lamp should be replaced and recorded.
Owing to its custom air cleaners and custom air cleaners benefits, has become a buzzword in the custom air cleaners market.
Qingdao Funglan Environmental Protection & Technology Co., Ltd. promises you that you will be satisfied with our service.
Qingdao Funglan Environmental Protection & Technology Co., Ltd., a manufacturer of air sterilizer, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.
Using high-quality materials to produce air sterilizer is one of the most important part during manufacturing.