Operation method of mobile air disinfection machine【knock the blackboard】

by:Funglan     2021-02-27
Air disinfection using a variety of methods of disinfection and sterilization technology is very effective in preventing bacteria from developing drug resistance. The medical air disinfector kills microorganisms in the hospital air quickly, efficiently, and without dead ends, and can effectively block the spread of viruses in the hospital air. The main functions of Huijingyuan brand air purification and disinfection machine: filtration, sterilization and disinfection, removal of various odors in the air, and removal of harmful gases in the air. The following will introduce the operation and setting process of Chengdu Huijingyuan sterilizer. 1. Automatic disinfection mode of medical air sterilizer: 1) Press the automatic operation key to select the automatic operation mode. 2) In the automatic operation mode, press the setting key, the increment key and the decrement key to adjust the automatic switch-on time. The adjustment sequence is: 1ON, 1OFF --- 6ON, 6OFF. 3) After the air disinfection selects the automatic operation mode, it will automatically turn on and off according to the set time. During the power-on period, the fan and the sterilization factor work; during the shutdown period (this period is also called the standby state), the fan and the sterilization factor are turned off. 4) The swing wind can be selected by pressing the swing wind key to swing and stop swinging. 5) After adjusting the power on and off time, you can press it to exit in a cycle, or you can press the power button in the middle to exit or unplug the power directly to exit. 6) After adjusting the switch time, the last time setting value will be automatically saved and saved permanently. 2. Manual disinfection mode of air sterilizer: 1) Press the temporary operation key, select temporary disinfection, disinfect according to the set time, and automatically return to automatic operation mode when the disinfection time is up. 2) The disinfection time adopts countdown mode, and the countdown time can be set freely. 3) In the temporary operation mode, press the setting key, the increment key and the decrement key to adjust the disinfection time, and the maximum can be set to 24 hours. 4) During temporary disinfection, the fan and the sterilization factor work, and the swing wind can be selected to swing and stop swinging by pressing the swing wind button. 5). After adjusting the disinfection time, you can press the cycle to the end to exit, you can also press the power button in the middle to exit or unplug the power directly to exit. 6) After adjusting the switch time, the last time setting value will be automatically saved and saved permanently. 3. In the power-on state, you can press the swing button to pause the swing, and press the swing button again to continue the swing. 4. When the medical air sterilizer is on or in standby mode, short press the wind speed key to select the predetermined running wind speed. 5. Long press the wind speed key for 3 seconds. You can query the remaining working time of the fan (filter). In the query state, you can press the up and down keys to adjust the cycle time. When the fan is working, it counts down the time of the fan (filter), when it is reduced to 0, it will prompt:! Please clean or replace the filter. Long press the wind speed key again to set. The maximum working time of the fan can be set to 99999 hours. 6. Long press the temporary operation key for 3 seconds to query the remaining working time of the sterilization factor. In the query state, you can press the up and down keys to adjust the cycle time. When the bactericidal factor is working, it counts down the time. When it is reduced to 0, it prompts:! Please replace the disinfection factor. If the sterilization factor cycle time is set to 0, the prompt function can be shielded and no prompt will appear. If the sterilization factor runs down to 0 and a prompt appears, you can press the sterilization key again to set it. The maximum cycle working time of the sterilization factor can be set to 99999 hours. 7. Long press to automatically run the key for 3 seconds, and the working time of the fan (filter) and sterilization factor can be restored to the factory default value. 8. Long press the setting button for 3 seconds, the sterilizer can enter the current state of Beijing time adjustment, press the increment and decrement keys to adjust the corresponding time value. 9. Press the power button to select the power on/off state. When the machine is turned off, the LCD and backlight are turned off. Pressing other keys is invalid. If the sterilizer is not used for a long time, it is recommended to turn off the power switch.
Qingdao Funglan Environmental Protection & Technology Co., Ltd. has various branches in different countries worldwide.
To reduce your production costs, get your and custom air cleaners from Qingdao Funglan Environmental Protection & Technology Co., Ltd.,you will get high quality warranty at favorable price in return. Visit Funglan Air Purifier.
Getting air sterilizer from an idea to production is a complex process. It involves significant research, time, planning and patience. But with the right information, the right resources and the right product, it's possible.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Thank you for your enquiry, we will get back to you ASAP