'Wall-mounted circulating wind UV disinfection machine' Wall-mounted circulating wind UV disinfection machine installation and purchase method-industry news

'Shandong wall-mounted circulating wind UV disinfection machine' Jinan wall-mounted circulating wind UV disinfection machine installation and purchase method Shandong Jinan wall-mounted circulating wind UV disinfection machine (wall-mounted circulating wind UV disinfection machine) is a fixed circulating wind UV A kind of disinfection machine, the disinfection machine is hung on the wall of the room, and the installation height is generally 2.0m-2.5m. The wall-mounted circulating air UV disinfection machine has air purification filters and disinfection and sterilization components installed in the upper area of u200bu200bthe machine. The ultra-quiet cross flow fan is installed at the lower part of the machine. The hanging circulating air UV disinfection machine has multi-faceted air intake and wide-angle Swing the wind. The disinfection machine is equipped with intelligent chemical sensor control elements, and the machine is equipped with a remote control, which can realize remote operation. The advantages of wall-mounted circulating air UV disinfection machine are exquisite and gentle in shape and color. The disinfection machine is hung on the wall and does not occupy the actual use area of u200bu200bthe room. It plays a role in decorating the room. In addition, the wall-mounted circulating wind UV disinfection machine has special noise low. Wall-type circulating air UV disinfection machine features: occupy a relatively small space, and it is not restricted by the installation position, and it is easier to match with interior decoration. The noise of the disinfection machine is very small when running. Wall-mounted circulating air UV disinfection machines are usually used for higher disinfection requirements In places where the current wall-mounted circulating wind ultraviolet disinfection machine has multiple purification functions, it can purify indoor air multiple times. The purchase of wall-mounted circulating air UV disinfection machine: it needs to be determined according to the actual needs of the user. Generally, it is suitable for rooms with an area of u200bu200bno more than 30 square meters (rooms with more than 30 square meters need to install two or more wall-mounted circulating air UV disinfection machine). For more wall-mounted wall-mounted circulating wind ultraviolet disinfection machine, please see: Installation of wall-mounted circulating wind UV disinfection machine: 1. Select the installation position, and fix the wall-mounted circulating wind UV disinfection machine mounting plate: put the back of the disinfector Remove the mounting plate and place the mounting plate in the pre-selected installation position. At this time, keep it level and keep enough dimensions with the ceiling and left and right walls to determine the position of the fixed wall plate hole. Use an electric hammer with a Ф6 drill bit to drill the fixing holes and insert the plastic expansion tube, and fix the mounting plate on the wall with self-tapping screws. The fixing holes shall not be less than 4-6, and the level of the mounting plate shall be determined with a spirit level. 2. Hanging wall-mounted circulating wind ultraviolet disinfection machine: Hang the disinfection machine to ensure that the machine snaps into the slot. When shaking it by hand, the upper, lower, left and right sides cannot be shaken. Use a level to measure whether the inner machine is level.